AF2 Home · Engineering Information · Telescope Operator · Duty Engineer · AF2 Experts · Links
This is an Engineering Interface Engineering Commands and is to be issued at the engineering interface.
POWER Command
| Format: | POWER state
state = ON | OFF | NULL |
| Description: | Switch the instrument power to state (ON or OFF). If the motor power is required to be turned off then this will be done automatically. Excluded a state value (NULL) gives status feedback. |
| Example: | Engineering command > power OFF |
For further information refer to the `AF2 Control System Software Manual'.
Links to other Engineering Interface Engineering Commands
 |
Created by Stephen Goodsell
sjg@ing.iac.es Last updated 9/01 |