AF2 Home · Engineering Information · Telescope Operator · Duty Engineer · AF2 Experts · Links
This is an Engineering Interface Engineering Commands and is to be issued at the engineering interface.
LASTMOVE Command
| Format: | LASTMOVE (no parameters) |
| Description: | This command displays the last fibre move attempted by the robot. This consists of fibre number and origin and destination positions of the fibre. As for the command issued at the OS/9 level. This command is generated by running a subprocess to run the lastmove.c program at OS/9 level. |
| Example: | Engineering command > lastmove |
For further information refer to the `AF2 Control System Software Manual'.
Links to other Engineering Interface Engineering Commands
 |
Created by Stephen Goodsell
sjg@ing.iac.es Last updated 9/01 |