Command Dictionary for IMPB
This page is part of the ING manual WHT-INGRID-2:
INGRID IMPB Software Operations Manual
Commands by Category
System Startup, Shutdown and
Help
Data Acquisition Commands
Mechanism Commands
TCS Commands
Observing System Scripts
Diagnostic Comands
Commands in Alphabetical Order
-
add: write the current contents
of the TCS edit source data area as a new entry in the TCS user catalog.
-
agstop: turn off TCS acceptance
of autoguider corrections.
-
aperture: offset the
telescope such that an object moves by a vector fixed in the local plane.
-
ap_dither2: perform 2 point
telescope offset / data acquisition sequence using TCS apertures
-
ap_dither3: perform 3 point
telescope offset / data acquisition sequence using TCS apertures.
-
ap_dither4: perform 4 point
telescope offset / data acquisition sequence using TCS apertures.
-
ap_dither5: perform 5 point
telescope offset / data acquisition sequence using TCS apertures.
-
ap_dither8: perform 8 point
telescope offset / data acquisition sequence using TCS apertures.
-
ap_dither9: perform 9 point
telescope offset / data acquisition sequence using TCS apertures.
-
dark: perform a
dark
data acquisition sequence.
-
datum: datum mechanisms.
-
detstat: report detector
status information.
-
diskstat: report space information on
observational data areas.
-
dither2: perform 2 point telescope offset / data
acquisition sequence using TCS offset command.
-
dither3: perform 3 point telescope offset / data
acquisition sequence using TCS offset command.
-
dither4: perform 4 point telescope offset / data
acquisition sequence using TCS offset command.
-
dither5: perform 5 point telescope offset / data
acquisition sequence using TCS offset command.
-
dither8: perform 8 point telescope offset / data
acquisition sequence using TCS offset command.
-
dither9: perform 9 point telescope offset / data
acquisition sequence.
-
filter: move mechanism wheels to specified configuration.
-
flat: perform a flat data acquisition
sequence.
-
fwheel1: move filter wheel 1 to specified position.
-
fwheel2: move filter wheel 2 to specified position.
-
glance: perform a glance data acquisition
sequence.
-
gocat: retrieve the entry for the named source
from the TCS catalog and send telescope to track that source.
-
guide: turn on TCS acceptance of autoguider corrections.
-
help: display help on available commands.
-
ifocus: move instrument focus to specified
position.
-
ifocusrun: acquire data to determine best
instrument focus position.
-
mchstat: report mechanism status information.
-
movie: perform a continual sequence
glances.
-
multrun: perform a multrun data
acquisition sequence.
-
next: send the telescope to track the source specified
in the TCS edit source data area.
-
numreads: specifies the number of MNDR reads
to be made during all subsequent data acquisition cycles.
-
object: enter new source data into the
TCS edit source data area.
-
offset: offsets the telescope by a given amount
in right ascension aand declination.
-
park: park telescope.
-
pimager: move pupil imager in or out of
instrument light path.
-
point: control logging of TCS encoder data.
-
pstop: move pupil stop wheel to specified position.
-
rotate: move the rotator to the specified mount
or sky position angle, or change its mode of operation.
-
run: perform a run data acquisition
sequence.
-
scratch: perform a scratch data acquisition
sequence.
-
shutdownisp: shut down the Instrument Support
Platform.
-
shutdownobssys:
shut down the entire observing system.
-
shutdownrtd: shut down the Real Time Display.
-
startisp: start up the Instrument Support Platform.
-
startobssys: start up the entire observing system.
-
startrtd: start up the Real Time Display.
-
tcs: send arbitrary user command string
to the TCS (see user command below).
-
tcsstat: report TCS status information.
-
tweak5: perform 5 point dither sequence, but offsetting
using TCS tweak command.
-
user: send arbitrary user command string
to the TCS (see tcs command above).
-
wheelcon: return the names of all filters and
pupil stops loaded into INGRID's mechanism wheels.
-
whtfocus: focus telescope.
-
whtfocusrun: acquire data to determine best
telescope focus position.