Index

This section describes the procedure to the instrument and associated units on to the telescope.  If you want a printed version of the information contained within this section of the AF2 website then you should print out the AF2/WYFFOS Instrument Change Document.  The step by step procedure describes the instrument change.

The other sections of this website related to this procedure are

AF2 Engineering Instrument Setup Procedure
AF2 Engineering Instrument Removal Procedure
AF2/WYFFOS Telescope Instrument Removal Procedure

This procedure has been divide into subsections that are easy to follow.  If you are setting up AF2 for the first time and need some help then contact one of the AF2 experts.

Telescope Instrument Setup Procedure
 

Section 1	AF2 Equipment
Section 2	Preparation (Day Before)
Section 3	Removing Secondary Mirror
Section 4	Installing AF2 part 1/2
Section 5	Installing AF2 part 2/2
Section 6	Engineering Checks
Section 7	AF2/WYFFOS Daily Duty Checks *
Section 8	Final Astronomy Checks

Note  If the instrument is still set up in the development area and you wnat to set it up on the telescope then you have to read the AF2 Engineering Instrument Removal Procedure first.