Next: Appendix A: TCS commands
Up: No Title
Previous: Exposing
![$\circ$](img2.gif)
- Switch the JAG lightpath to CCD to protect sensitive TV system.
![$\circ$](img2.gif)
- Turn TV and Autoguider OFF.
![$\circ$](img2.gif)
- Zenith park telescope.
![$\circ$](img2.gif)
- Switch to engineering mode and type ACKNOWLEDGE in the TCS window.
![$\circ$](img2.gif)
- Close mirror covers - check they're not sticking.
![$\circ$](img2.gif)
- Close dome shutters.
![$\circ$](img2.gif)
- Rotate the dome to avoid any expected bad weather.
Storm:
point shutter into the wind. Ice: point shutter south.
![$\circ$](img2.gif)
- Turn off oil pump and cancel alarm(s).
![$\circ$](img2.gif)
- Turn OFF telescope power.
![$\circ$](img2.gif)
- Start dumping your D tape.
![$\circ$](img2.gif)
- Refill cryostat.
![$\circ$](img2.gif)
- If D tape finished, start C tape dumping, and leave a note
on the Sparc terminal.
![$\circ$](img2.gif)
- Turn off dome lights.
![$\circ$](img2.gif)
- Put the cat out.
![$\circ$](img2.gif)
- Go to bed.
1999-11-12