AF2 Home · Engineering Information · Telescope Operator · Duty Engineer · AF2 Experts · Links

Autofib 2/WYFFOS Telescope Instrument Setup Procedure

Section 1 : AF2 Equipment

Below is a list of AF2 equipment that you need to set the instrument up on the  telescope.  The list contains the location of where the item should be stored.  If the item is missing then the person responsible for the instrument (currently Kevin Dee kmd@ing.iac.es) should be informed.  A picture of each item will be viewed by clicking on each items link.

NOTE  The AF2 Cables link will give you a description on the 19 cables that should be in the AF2 Cabinet.
 
ITEM LOCATION
AF2 Robot Storage Place ???
AF2 Small Fibre Module Storage Place ??? 
AF2 VME Crate AF2 Cabinet
AF2 Servo Control Amplifier AF2 Cabinet
AF2 VT220 Terminal AF2 Cabinet
AF2 VT220 Keyboard AF2 Cabinet
AF2 Inspection TV Monitor AF2 Cabinet
AF2 Mimic Display Monitor AF2 Cabinet
AF2 Science Fibre Light Source WHT Store Room
AF2 Cables (19) AF2 Cabinet

I NEED TO ADD TO PAGE ADDITIONAL EQUIPTMENT  ASSOCIATED WITH THE TELESCOPE

This page serves as a check, it is good to make sure in good time that the equipment is where it should be.

Proceed to Section 2  Preparation (Day Before)


Created by Stephen Goodsell
sjg@ing.iac.es
Last updated 9/01