AF2 Home · Engineering Information · Telescope Operator · Duty Engineer · AF2 Experts · Links

Section 2 : Removing the Control System

Removing the AF2 Control System from GHRIL

1.       Now the power to AF2 VME crate, servo amplifier crate, VT220 monitor and the video display can be turned off.
2.       Remove the connections for the mimic from the GHRIL patch panel. These are red=26, green=87, blue=62, sync=88.
3.       Remove the video display connection from the GHRIL patch panel. This is Video=82
4.       Remove the connection from AF2 to the NIU port 1
5.       Remove the patch to NIU port 2 to prime port 2 for the autoguider ccd controller.
6.       Uncable the AF2 control system in GHRIL and neatly store the cables in the Autofib cabinet in the dome.
7.       Remove the AF2 VME crate, Servo amplifier crate, VT220 monitor and the Video display and store in the Autofib cabinet in the dome.

Created by Stephen Goodsell sjg@ing.iac.es Last updated 9/01