| |
|
|
|
Viewing Connection Status
You can view the connection status while debugging by selecting View | Connection Status from the menubar. TclPro Debugger displays the Connection Status window shown in Figure 19.
Figure 19 The Connection Status Window
The Connection Status Window displays the following information:
- Project Type-Whether the project is local or remote.
- Connection Status-Whether or not the application has established a connection to TclPro Debugger.
- Listening Port-The port number on which TclPro Debugger listens for a connection from a remote application. You can set this port for remote debugging in the Listen For Remote Connection On Port Number field of the Project Application Settings Tab. See "Changing Project Application Settings". The default port is 2576.
- Local Socket Info-The IP address and socket number on the system running TclPro Debugger used for communication with a remote application. This is created only after a connection is established.
- Peer Socket Info-The IP address and socket number on the system running the remote application used for communication with TclPro Debugger. This is created only after a connection is established.
 http://www.ajubasolutions.com Voice: (650) 210-0100 Fax: (650) 210-0101 support@ajubasolutions.com |
| |
|
|
|