Weave Autoguider Documentation

Weave AG system

• WeaveAutoguiderSystem.docx
• WeaveAutoguiderSystem.pdf

Weave AG camera head mechanical drawings ( AutoCAD LT )

• head_support.dwg
• head_topplate.dwg
• head_righthandsideplate.dwg
• head_lefthandsideplate.dwg
• head_base.dwg
• head_CCDspacer.dwg
• head_endplate.dwg
• head_lensholder.dwg
• head_interface.dwg

• head_support.pdf
• head_topplate.pdf
• head_righthandsideplate.pdf
• head_lefthandsideplate.pdf
• head_base.pdf
• head_CCDspacer.pdf
• head_endplate.pdf
• head_lensholderplate.pdf
• head_interface.pdf

Weave AG camera head circuit diagrams ( Eagle layout )

• compact1.sch
• compact2.sch

• compact1.pdf
• compact2.pdf

Weave AG camera PCB layouts 'as manufactured' ( Eagle schematic )

• compact1.brd
• compact2.brd

• compact1_pcb.pdf
• compact2_pcb.pdf

Weave AG camera internal wiring ( Eagle schematic )

• compact_head_overview.sch

• compact_head_overview.pdf

Weave AG SDSU controller utility auxillary card PCB layout 'as manufactured' ( Eagle layout )

• Auxillary_board.brd

• Auxillary_board_pcb.pdf

Weave AG SDSU controller utility auxillary card circuit diagram ( Eagle schematic )

• Auxillary_board.sch

• Auxillary_board.pdf

Weave AG SDSU controller internal wiring ( Eagle schematic )

• SDSU_Clock&Video_board_internal_wiring_new.sch
• SDSU_Auxillary_board_internal_wiring.sch

• SDSU_Clock&Video_board_internal_wiring_new.pdf
• SDSU_Auxillary_board_internal_wiring.pdf

Weave AG SDSU hardware configuration ( Word )

• Weave_Autoguider_SDSU_Configuration.docx

• Weave_Autoguider_SDSU_Configuration.pdf

Weave AG power supply rack ( Eagle Schematic )

• WeaveAGpsuRack.sch
• WeaveAGpsuRack.pdf

Weave SDSU code

• Timing code - /home/dspdev/ccd/timIII/AG_WEAVE

• Utility code - /home/dspdev/ccd/utilIII/AGWEAVE

• Utility card noticeboards.

X noticeboard,

Y noticeboard,

Y:$0000
the ID-code.
Y:NBAY
current exposure (Y:CUR_EXP)
YNBAY+1
MOS camera temperature (Y:MOS_TEM)
Y:NBAY+2
current preflash (Y:CUR_PFL)
Y:NBAY+3
shutter state (Y:SHUT_ST)
Y:NBAY+4
errno (Y:ERR_NO)
Y:NBAY+5
LIFU camera temperature (Y:IFU_TEM)
Y:NBAY+6
not used
Y:NBAY+7
not used
Y:NBAY+8
not used
Y:NBAY+9
Peltier status (0=both off, 1=MOS on, 2=LIFU on, 3=both on) (Y:ELT_ST)

• The ID dongle is read by UltraDAS on startup. The Weave ID code is 83, with the high nibble (8) hard-wired into all Weave autoguider utility card aux. boards. The low nibble (3) is configurable in the MOS head, the LIFU head code is not read.

• Windows (i) MOS+LIFU CCDs "[1:2144,1:977]" (ii) MOS CCD only "[1:1072,1:977]" (iii) LIFU CCD only "[1073:2144,1:977]"

Weave AG voltages (Excel)

• WeaveAGvolt.xlsx

• WeaveAGvolt.pdf

• Clock triplet images

Andy Ridings 2nd Feb. 2018

Detector Group Astronomy Pages

ING Home

Feedback