Bins a CCD detector
2=to: 2!:}Format: BIN <channel> <xbin> <ybin>
2=to: 2!:}Channel: The name of the CCD data acquisition channel to be binned.
2=to: 2!:}Xbin: The binning factor in X. This must be an integer in the range 1 - 10.
2=to: 2!:}Ybin: The binning factor in Y. This must be an integer in the range 1 - 10.
2=to: 2!:}Examples : BIN PFIP 2 2
2=to: 2!:}Comments: This command sets the binning factors on the named channel in both X and Y, and enables windowing and binning on the CCD.