Previous: BLUEXDISP
Up: ISIS Commands
Next: BFILTB
Previous Page: BLUEXDISP
Next Page: BFILTB
To move filter slide A in the Blue beam to a given position.
Format: BFILTA <position>
Example: BFILTA 2
Range: 0 to 2, or a named position.
Comments: Moves, stops or initialises Blue Filter A. Valid parameters are a position in the range 0 to 2; a named filter (listed on the ISIS MIMIC page); OUT; STOP; INIT and REPROGRAM. The last option should only be used in exceptional circumstances.