Previous: UES_INIT
Up: Initialisation, status and cancel commands
Next: UES_CANCEL
Previous Page: UES_INIT
Next Page: UES_CANCEL

UES_UPDATE

Gets status of specified mechanism and updates the ICL MIMIC display.

Format: UES_UPDATE <parameter>

Units: None

Parameter: Any individual mechanism name, or ALL, NAG, UES or TEMP

Examples : UES_UPDATE USLITWIDTH

Comments: If ALL is specified, status is obtained for all mechanisms are initialised. If NAG is specified, status is only obtained for A&G mechanisms, and if UES is specified, status is only obtained for spectrograph mechanisms. If TEMP is specified, then all temperature sensors are read.


Mon Mar 14 16:50:31 GMT 1994