Previous: CS100_EXT
Up: Reference section
Next: CS100_INT
Previous Page: CS100_EXT
Next Page: CS100_INT

CS100_GAIN

Sets the gain for the CS100 servo--loop

Format: CS100_GAIN <parameter>

Units: none

Range: 0 < <parameter> < 9

Defaults: Defaults to 5 on power--up

Examples : CS100_GAIN 5

Comments: Issuing CS100_GAIN will only result in a change of state of the CS100 once external control has been enabled (command CS100_EXT).


Thu Apr 7 00:29:52 BST 1994