Previous: Aperture masks
Up: Setting up the Instrument
Next: Grisms
Previous Page: Aperture masks
Next Page: Grisms
Previous: Aperture masks
Up: Setting up the Instrument
Next: Grisms
Previous Page: Aperture masks
Next Page: Grisms
The standard filters for use with LDSS are listed in
Table 3.
Observers may supply their own filters.
The specification is that the diameter must be 100mm (
0.1mm) and
the thickness less than 8mm.
Filters should only be installed by qualified personnel.
In the case of user-supplied filters, staff should be notified in
advance to give time for any additional spacers to be manufactured.