Previous: SCRATCH
Up: Data Taking Commands - CCD Detectors
Next: SKY
Previous Page: SCRATCH
Next Page: SKY
Previous: SCRATCH
Up: Data Taking Commands - CCD Detectors
Next: SKY
Previous Page: SCRATCH
Next Page: SKY
Sets up the default detector format, and prepares a channel for taking data.
Format: SETUP <channel>
Channel: The name of the CCD data acquisition channel to be used.
Examples : SETUP RED
Comments: The system will read the default detector format from the configuration database and set the detector up accordingly. The user will be informed when the set-up is complete. No exposures can be made until the channel has been set up by this command.