Previous: Glossary of commands
Up: No Title
Previous Page: Glossary of commands
- What CCDs are
- ABORT
- PA(USE)/CONT(INUE)/STO(P)/ABO(RT)-Run control
- ADAM
-
INTRODUCTION, Logging in
- ADD
- ADD/SUB/DIV/MUL(T) - Image/image
- BIN
- BIN/UNBIN - On-chip
- CADD
- CAD(D)/CSU(B)/CDI(V)/CMU(LT)-Image/scalar arithmetic
- CALRUN
- CALR(UN) - Perform
- CCD
chips readout noise
- Signal-to-noise
- CCD chips
temperature
- What CCDs are
- CCD chips
clocking
- What CCDs are
- CCD chips
temperature
- What CCDs are
- CCD chips alter readout window
- QWIN(DOW)/WIN(DOW)/DEF_WINDOW - Enquire
- CCD chips change record of type
- QCH(IP)/CH(IP) - Enquire
- CCD chips choosing GEC or RCA
- WHICH CHIP? WHICH
- CCD chips clear chip
- SEN(D) CON: - , CLE(AR)/NOCL(EAR)/EXPO(SE)/REA(D)
- CCD chips clocking
- What CCDs are , What CCDs are , What CCDs are , Operational requirements, Operational requirements, LimitationsExtra Observations,
- CCD chips don't clear chip
- CLE(AR)/NOCL(EAR)/EXPO(SE)/REA(D)
- CCD chips dynamic range
- What CCDs are , Operational requirements, Photometric standards
- CCD chips how they work
- INTRODUCTION
- CCD chips names of chips
- QCH(IP)/CH(IP) - Enquire
- CCD chips on-chip binning
- Operational requirements, Operational requirements, Operational requirements, LimitationsExtra Observations, , WHICH CHIP? WHICH , BIN/UNBIN - On-chip
- CCD chips pixel
sizes
- Signal-to-noise
- CCD chips pixel sizes
- EXPOSURE TIME?, Zeroing the main
- CCD chips read
- CLE(AR)/NOCL(EAR)/EXPO(SE)/REA(D)
- CCD chips readout noise
- What CCDs are , WHICH CHIP? WHICH , Signal-to-noise
- CCD chips technology
- What CCDs are
- CCD chips temperature
- What CCDs are , Operational requirements, Operational requirements, LimitationsExtra Observations, , Initialisation operations, Thermal properties, Routine operation
- CCDFINIT
- Initialisation operations, CCDFINIT - Initialise
- CCDFSTATUS
- FILTST(ATUS) - Filter
- CCDINIT
- Initialisation operations, CCDINIT/RESET(CCD) - Re-initialisation
- CCDSPACE
- CCDSPACE -Check room
- CDIV
- CAD(D)/CSU(B)/CDI(V)/CMU(LT)-Image/scalar arithmetic
- CHFORM
- CHFORM - Change
- CHIP
- QCH(IP)/CH(IP) - Enquire
- CLEAR
- CLE(AR)/NOCL(EAR)/EXPO(SE)/REA(D)
- CLOSE
- OP(EN)/CLO(SE) - Shutter
- CMULT
- CAD(D)/CSU(B)/CDI(V)/CMU(LT)-Image/scalar arithmetic
- COMMENT
- COMM(ENT) - Add
- CONTINUE
- PA(USE)/CONT(INUE)/STO(P)/ABO(RT)-Run control
- COPY
- COPY - Copy
- CSUB
- CAD(D)/CSU(B)/CDI(V)/CMU(LT)-Image/scalar arithmetic
- DARK
- DARK - Perform
- DEF_WINDOW
- QWIN(DOW)/WIN(DOW)/DEF_WINDOW - Enquire
- DELETE
- PURGE/DELETE - Delete
- DESCR
- Introduction, DESCR
- DIPARM
- QDI(PARM)/DIP(ARM) - Enquire
- DISP
- DIS(P) - Display
- DIV
- ADD/SUB/DIV/MUL(T) - Image/image
- DSPACE
- DSPACE - Enquire
- EDITWHEEL
- EDITWHEEL - Edits
- EXPOSE
- CLE(AR)/NOCL(EAR)/EXPO(SE)/REA(D)
- EXTRACT
- SQEL/EXTR(ACT) - Sub-image
- FF
- FF - Flat
- FILTER
- Filters, Filters, FILT(ER) - Change
- FILTSTATUS
- Filters, FILTST(ATUS) - Filter
- FITSCOPY
- FITSINIT/FITSDIR/FITSOUT/FITSIN/FITSCOPY
- FITS , Introduction, FITSCOPY
- FITSDIR
- FITSINIT/FITSDIR/FITSOUT/FITSIN/FITSCOPY
- FITS , Introduction, FITSDIR
- FITSIN
- FITSINIT/FITSDIR/FITSOUT/FITSIN/FITSCOPY
- FITS , FITSINIT
- FITSINIT
- FITSINIT/FITSDIR/FITSOUT/FITSIN/FITSCOPY
- FITS , Introduction, FITSINIT
- FITSOUT
- FITSINIT/FITSDIR/FITSOUT/FITSIN/FITSCOPY
- FITS , FITSOUT
- FLASH
- QFL(ASH)/SETFLA(SH)/FL(ASH) - Pre-flash
- FLATFIELD
- FLATF(IELD) - Performs
- FOCINC
- FOCINC - Change
- FOCUS
- FOCUS - Perform , FOC(US) - Make
- GDFOCPOS
- GDFOC(POS) - Change
- GDXPOS
- GDX(POS)GDY(POS), GDXY(POS)
- GDXYPOS
- GDX(POS)GDY(POS), GDXY(POS)
- GDYPOS
- GDX(POS)GDY(POS), GDXY(POS)
- GETF
- GETF - List
- GFILE
- GLA(NCE)/GFILE - A
- GLANCE
- GLA(NCE)/GFILE - A
- HELP CCD
- HELP CCD -
- HELP PFCU
- HELP PFCU -
- HELP UTIL
- HELP UTIL -
- IMAGPLOT
- IMAGPLOT - Plot
- Isaac Newton Telescope focus
- Telescope and autoguider
- Isaac Newton Telescope geometric area
- Signal-to-noise
- Isaac Newton Telescope move star
- MOVESTAR - Put
- Isaac Newton Telescope pointing and acquisition
- Acquisition, Pointing
- Isaac Newton Telescope zeroing
- Zeroing the main
- KEEP
- KEE(P)/STO(RE)/REC(ALL) - Image
- KILLMULTRUN
- KILLMULT(RUN) - Abort
- LEXCLEAR
- LEXIDATA DISPLAY OPERATIONS
- LEXIDATA commands
- LEXIDATA DISPLAY OPERATIONS
- LEXIDATA joystick and switches
- LEXIDATA DISPLAY OPERATIONS
- LEXINIT
- LEXIDATA DISPLAY OPERATIONS
- LEXPAN
- LEXIDATA DISPLAY OPERATIONS
- LEXPLOT
- LEXIDATA DISPLAY OPERATIONS
- LEXZOOM
- LEXIDATA DISPLAY OPERATIONS
- LUTCONTRAST
- LEXIDATA DISPLAY OPERATIONS
- LUTLOAD
- LEXIDATA DISPLAY OPERATIONS
- LUTROTATE
- LEXIDATA DISPLAY OPERATIONS
- LXXC
- DIS(P) - Display
- LXYC
- DIS(P) - Display
- MOVESTAR
- MOVESTAR - Put
- MULT
- ADD/SUB/DIV/MUL(T) - Image/image
- MULTBIAS
- MULTBIAS - Takes
- MULTEXP
- MULTEXP - Perform
- MULTRUN
- MULTRUN - Perform
- NEXTRUN
- NEXTR(UN) - Change
- NOCLEAR
- Initialisation operations, CLE(AR)/NOCL(EAR)/EXPO(SE)/REA(D)
- NOPACKETS
- NOPACKETS/PACKETS - Disable/enable
- OBSNAME
- OBSN(AME) - Change
- OFFSET
- OFFSET - Change
- PA(USE)
- PA(USE)/CONT(INUE)/STO(P)/ABO(RT)-Run control
- PACKETS
- NOPACKETS/PACKETS - Disable/enable
- PEEP
- PEE(P)/STATS
- PFCUINIT
- PFCUINIT - Initialisation
- PFSTATUS
- PFST(ATUS) - Status
- PHOTOM
- PHOT(OM) - Simple
- PURGE
- PURGE/DELETE - Delete
- QCHIP
- QCH(IP)/CH(IP) - Enquire
- QDIPARM
- QDI(PARM)/DIP(ARM) - Enquire
- QFILES
- Image storage, QFI(LES) - Determine
- QFLASH
- QFL(ASH)/SETFLA(SH)/FL(ASH) - Pre-flash
- QWHEEL
- QWHE(EL) - List
- QWINDOW
- QWIN(DOW)/WIN(DOW)/DEF_WINDOW - Enquire
- READ
- CLE(AR)/NOCL(EAR)/EXPO(SE)/REA(D)
- RECALL
- KEE(P)/STO(RE)/REC(ALL) - Image
- RESETCCD
- Initialisation operations, CCDINIT/RESET(CCD) - Re-initialisation
- RESETTV
- RESETTV - Send
- ROTPOS
- ROTPOS - Move
- RUN
- RU(N) - The
- RUNSTATUS
- RUNSTAT(US)/TIM(E)- How long
- Rn
- Image storage, SELECTED DATA PROCESSING
- SEND CON:
- SEN(D) CON: -
- SETFLASH
- QFL(ASH)/SETFLA(SH)/FL(ASH) - Pre-flash
- SETFOCUS
- Telescope and autoguider , SETFOC(US) - Compensate
- SETFOCUS DISABLE
- Telescope and autoguider , SETFOC(US) DISABLE -
- SETGDFOCUS
- Telescope and autoguider , SETGDFOC(US) DISABLE -
- SETGDFOCUS DISABLE
- Telescope and autoguider , SETGDFOC(US) DISABLE -
- SHUTDOWN
- SHUTDOWN - Shut
- SIGNOFF
- Logging in, SHUTDOWN - Shut
- SIGNON
- Logging in
- SNAFU
- Zeroing the main
- SQEL
- SQEL/EXTR(ACT) - Sub-image
- STARFIT
- STARFIT - Fit
- STARTMIMIC
- STARTMIMIC - Reset
- STATS
- PEE(P)/STATS, STATS - Analyse
- STOP
- PA(USE)/CONT(INUE)/STO(P)/ABO(RT)-Run control
- STORE
- KEE(P)/STO(RE)/REC(ALL) - Image
- SUB
- ADD/SUB/DIV/MUL(T) - Image/image
- Sn
- Image storage
- TAPE
- TAP(E)
- TELE
- TEL(E) - System
- TIME
- RUNSTAT(US)/TIM(E)- How long
- TV
SETSCALE - Autoguiding
- TVDISPFZ
- TVD(ISPFZ)/TVG(ETFZ)/TVSETFZ - Finder
- TVGETFZ
- TVD(ISPFZ)/TVG(ETFZ)/TVSETFZ - Finder
- TVSETFZ
- TVD(ISPFZ)/TVG(ETFZ)/TVSETFZ - Finder
- TVSETSCALE
- TVSETSCALE - Reset
- Tn
- Image storage
- UNBIN
- BIN/UNBIN - On-chip
- WHEEL
- WHE(EL) - Select
- WINDOW
- QWIN(DOW)/WIN(DOW)/DEF_WINDOW - Enquire
- archive packets, disable writing of
- NOPACKETS/PACKETS - Disable/enable
- archive packets, enable writing of
- NOPACKETS/PACKETS - Disable/enable
- autoguider focus
- GDFOC(POS) - Change
- autoguider focus compensation
- SETGDFOCUS - Compensate , SETGDFOC(US) DISABLE -
- autoguider probe, moving
- GDX(POS)GDY(POS), GDXY(POS)
- autoguider probe, position
- PFST(ATUS) - Status
- autoguider using
- Autoguiding
- averaging exposures
- Flat Fields , MULTBIAS - Takes
- back-illumination
- What CCDs are
- beamswitching
- Autoguiding, Autoguiding, OBSERVING: A RECIPE
- bias
- LimitationsExtra Observations, , LimitationsExtra Observations, , LimitationsExtra Observations, , Acquisition, OBSERVING: A RECIPE, Initialisation operations, RU(N) - The , MULTBIAS - Takes , PHOT(OM) - Simple , PHOT(OM) - Simple
- bias technique for determining
- Bias Frames , MULTBIAS - Takes
- binning, on-chip
- Operational requirements, Operational requirements, Operational requirements, LimitationsExtra Observations, , WHICH CHIP? WHICH , BIN/UNBIN - On-chip
- blank areas of sky, time to expose on them in
twilight
- Flat Fields
- blank areas of sky, time to expose on them in twilight
- Blank Areas of
- camera controller
- Operational requirements, Operational requirements, Operational requirements, Time limits, Initialisation operations, CCDINIT/RESET(CCD) - Re-initialisation
- camera see prime camera focus camera
- INTRODUCTION
- charge transfer
- What CCDs are , What CCDs are , LimitationsExtra Observations,
- clear chip
- CLE(AR)/NOCL(EAR)/EXPO(SE)/REA(D)
- clear chip don't clear chip
- CLE(AR)/NOCL(EAR)/EXPO(SE)/REA(D)
- clocking
- What CCDs are , What CCDs are , What CCDs are , What CCDs are , Operational requirements, Operational requirements, LimitationsExtra Observations,
- comments
- COMM(ENT) - Add
- copy images
- COPY - Copy
- cosmic rays
- What CCDs are , Operational requirements
- cryostat
- Operational requirements, Operational requirements, OBSERVING: A RECIPE, OBSERVING: A RECIPE, Cryostat description, Thermal properties, A description of , A description of , A description of , A description of , A description of , Topping up, Topping up, Routine operation, Routine operation, Routine operation, Routine operation, Routine operation, Routine operation, Using the 75 , Using the 75 , Further notes, Further notes
- cryostat filling
- A description of
- dark signal
- What CCDs are
- dark-count
- LimitationsExtra Observations, , LimitationsExtra Observations, , Dark counts
- dark-count making a dark count exposure
- DARK - Perform
- dark-count techniques for determining
- Dark counts
- data reduction arithmetic
- ADD/SUB/DIV/MUL(T) - Image/image , CAD(D)/CSU(B)/CDI(V)/CMU(LT)-Image/scalar arithmetic
- data reduction peep
- PEE(P)/STATS
- data reduction photometry package
- PHOT(OM) - Simple
- data reduction squelching
- SQEL/EXTR(ACT) - Sub-image
- data reduction star profile
- STARFIT - Fit
- data reduction statistics
- PHOT(OM) - Simple , PEE(P)/STATS, STATS - Analyse
- data reduction subdividing into subimages
- SQEL/EXTR(ACT) - Sub-image
- disk (see also files
dump device)
- DAT(A) - Redefine ,
- disk (see also files, dump
device)
- PURGE/DELETE - Delete
- disk (see also files, dump
device)
- PURGE/DELETE - Delete
- disk (see also files, dump device)
- Logging in, Initialisation operations, Image storage, DSPACE - Enquire , DSPACE - Enquire , DSPACE - Enquire , CCDSPACE -Check room , QFI(LES) - Determine
- disk (see also files, dump device) changing
- QFI(LES) - Determine
- disk (see also files, dump device) name of data disk
- DSPACE - Enquire
- disk (see also files, dump device) space left on
- DSPACE - Enquire , CCDSPACE -Check room
- display
- DIS(P) - Display
- display colour look up table
- LEXIDATA DISPLAY OPERATIONS
- display commands
- LEXIDATA DISPLAY OPERATIONS
- display geometry
- DIS(P) - Display
- display image properties
- PHOT(OM) - Simple , STARFIT - Fit
- display joystick and switches
- LEXIDATA DISPLAY OPERATIONS
- display parameters (default, fold and truncate)
- QDI(PARM)/DIP(ARM) - Enquire
- display recall and display a previous image
- KEE(P)/STO(RE)/REC(ALL) - Image
- dump device
- Logging in, Initialisation operations, RU(N) - The , KILLMULT(RUN) - Abort , Image storage, PURGE/DELETE - Delete , PURGE/DELETE - Delete , DAT(A) - Redefine , DSPACE - Enquire , DSPACE - Enquire , DSPACE - Enquire , CCDSPACE -Check room , QFI(LES) - Determine
- dynamic range
- What CCDs are , Operational requirements, Photometric standards
- erase cycle
- Operational requirements, Operational requirements
- exposure
what you can't do during
- RU(N) - The
- exposure (see also files, runs)
- RU(N) - The , CLE(AR)/NOCL(EAR)/EXPO(SE)/REA(D)
- exposure aborting
- PA(USE)/CONT(INUE)/STO(P)/ABO(RT)-Run control
- exposure altering exposure time
- RUNSTAT(US)/TIM(E)- How long
- exposure continuing
- PA(USE)/CONT(INUE)/STO(P)/ABO(RT)-Run control
- exposure how long to go?
- RUNSTAT(US)/TIM(E)- How long
- exposure multiple runs
- MULTRUN - Perform , MULTBIAS - Takes
- exposure multiple runs stopping
- KILLMULT(RUN) - Abort
- exposure pausing
- PA(USE)/CONT(INUE)/STO(P)/ABO(RT)-Run control
- exposure stopping
- PA(USE)/CONT(INUE)/STO(P)/ABO(RT)-Run control
- exposure time
- EXPOSURE TIME?, RU(N) - The
- exposure what
you can't do during
- TEL(E) - System
- exposure what you can do
during
- RU(N) - The
- exposure what you can't do during
- MULTBIAS - Takes , KEE(P)/STO(RE)/REC(ALL) - Image
- extinction
- Pointing
- files of data etc
- Image storage
- files of data etc adding comments
- COMM(ENT) - Add
- files of data etc ask what's what
- QFI(LES) - Determine
- files of data etc copying
- COPY - Copy
- files of data etc deleting
- PURGE/DELETE - Delete
- files of data etc glance files
- GLA(NCE)/GFILE - A
- files of data etc notation for
- Image storage, SELECTED DATA PROCESSING
- files of data etc purging
- PURGE/DELETE - Delete
- files of data etc purging glance files
- GLA(NCE)/GFILE - A
- files of data etc recalling a file
- KEE(P)/STO(RE)/REC(ALL) - Image
- files of data etc run files
- Image storage
- files of data etc store files
- Image storage, KEE(P)/STO(RE)/REC(ALL) - Image
- files of data etc temporary files
- Image storage
- filters
- Filters, FILTERS
- filters change filter, physically in filter wheel
- Mounting CCD filters
- filters change filter, software
- FILT(ER) - Change
- filters constitution
- Kitt Peak Interference , RGO Glass Broad , RGO Interference Filters
- filters filter wheel
- FILTST(ATUS) - Filter , WHE(EL) - Select , EDITWHEEL - Edits , QWHE(EL) - List
- filters interference filters
- Mounting CCD filters, Kitt Peak Interference , RGO Interference Filters
- filters interference filters central wavelength
- Calculation of Central
- filters interference filters change with temperature
- Change due to
- filters interference filters optical depths
- Calculation of Focus
- filters interference filters transmission
- Filter
Transmission Scans
- finder telescope flexure
- Zeroing the main
- finder telescope scale
- Autoguiding, TVSETSCALE - Reset
- finder telescope television
- TVD(ISPFZ)/TVG(ETFZ)/TVSETFZ - Finder
- finder telescope television reset
- RESETTV - Send
- finder telescope zeroing
- Zeroing the main , TVD(ISPFZ)/TVG(ETFZ)/TVSETFZ - Finder
- flat
field sequence of filters for
- Flat Fields
- flat field
- LimitationsExtra Observations, , Time limits, Flat Fields , Flat Fields , OBSERVING: A RECIPE, FLATF(IELD) - Performs , FF - Flat
- flat field blank fields for
- Blank Areas of
- flat field correcting data for
- FF - Flat
- flat field techniques for measuring
- Flat Fields , FLATF(IELD) - Performs
- flat filed sequence of filters for
- OBSERVING: A RECIPE
- focus
telescope focus compensation for temperature
- Telescope and autoguider
- focus autoguider
- Telescope and autoguider , GDFOC(POS) - Change , SETGDFOCUS - Compensate , SETGDFOC(US) DISABLE -
- focus telescope focus compensation for filter thickness
- SETFOC(US) - Compensate
- focus telescope focus compensation for temperature
- GETF - List
- focus telescope focus procedure
- Telescope and autoguider , FOC(US) - Make
- focus telescope focus procedure, change parameters
- FOCINC - Change , OFFSET - Change
- fringe
pattern
- WHICH CHIP? WHICH
- fringe pattern
- LimitationsExtra Observations, , LimitationsExtra Observations, , LimitationsExtra Observations, , LimitationsExtra Observations, , LimitationsExtra Observations, , WHICH CHIP? WHICH , Some comments
- front-illumination
- What CCDs are
- glance files
- GLA(NCE)/GFILE - A
- glance files keeping
- KEE(P)/STO(RE)/REC(ALL) - Image
- guide star location and acquisition
- Autoguiding
- guide star problems in finding
- Autoguiding
- help
- ON-LINE HELP, HELP CCD - , HELP UTIL - , HELP PFCU -
- image compacting
- SQEL/EXTR(ACT) - Sub-image
- image formats
- ADD/SUB/DIV/MUL(T) - Image/image
- image formats altering
- CHFORM - Change
- image plotting
- IMAGPLOT - Plot
- image subdividing
- SQEL/EXTR(ACT) - Sub-image
- initialising CCD controller
- CCDINIT/RESET(CCD) - Re-initialisation
- initialising data tapes
- FITSINIT/FITSDIR/FITSOUT/FITSIN/FITSCOPY
- FITS
- initialising display
- LEXIDATA DISPLAY OPERATIONS
- initialising filter wheel software
- CCDFINIT - Initialise
- initialising mimic display
- STARTMIMIC - Reset
- initialising prime focus camera unit
- PFCUINIT - Initialisation
- initialising whole software system
- Initialisation operations, CCDINIT/RESET(CCD) - Re-initialisation
- local driver
- Operational requirements, Operational requirements
- log in
-
INTRODUCTION
- multiple exposures
- MULTEXP - Perform , MULTBIAS - Takes
- observer change initials
- OBSN(AME) - Change
- observer sign on
- Logging in
- observing recipe
- OBSERVING: A RECIPE
- offsetting telescope
- MOVESTAR - Put
- packets of archive data
- NOPACKETS/PACKETS - Disable/enable
- photometric package
- PHOT(OM) - Simple
- photometric package star profiles
- STARFIT - Fit
- photometric standard stars
- HELP PFCU -
- photometric standard stars cluster sequences
- UBVRI magnitudes and
- plot an image on printer
- IMAGPLOT - Plot
- point spread function
- WHICH CHIP? WHICH
- pre-flash
- LimitationsExtra Observations, , GLA(NCE)/GFILE - A , RU(N) - The , QFL(ASH)/SETFLA(SH)/FL(ASH) - Pre-flash
- pre-flash make a flash
- QFL(ASH)/SETFLA(SH)/FL(ASH) - Pre-flash
- pre-flash query current setting
- QFL(ASH)/SETFLA(SH)/FL(ASH) - Pre-flash
- pre-flash set value
- QFL(ASH)/SETFLA(SH)/FL(ASH) - Pre-flash
- prime focus
camera shutter
- MULTEXP - Perform
- prime focus camera geometry
- To check and
- prime focus camera guider probes
- GDX(POS)GDY(POS), GDXY(POS)
- prime focus camera initialisation
- PFCUINIT - Initialisation
- prime focus camera orientation
- Acquisition
- prime focus camera shutter
- Time limits, Time limits, Initialisation operations, OP(EN)/CLO(SE) - Shutter , Photometric standards
- prime focus camera status
- PFST(ATUS) - Status
- print an image
- IMAGPLOT - Plot
- problem solving. ADAM dies
- SEN(D) CON: -
- problem solving. GLANCE file accidentally deleted
- Image storage
- problem solving. GLANCE file protected
- GLA(NCE)/GFILE - A
- problem solving. computer won't shutdown
- SHUTDOWN - Shut
- problem solving. computer won't start
- Logging in
- problem solving. display has bits missing
- DIS(P) - Display
- problem solving. filter wheel times out
- FILT(ER) - Change
- problem solving. mimic display hangs up
- STARTMIMIC - Reset
- problem solving. tape spools wobbly
- Loading and unloading
- problem solving. timeout on READ, CLEAR or FLASH
- CCDINIT/RESET(CCD) - Re-initialisation
- read the chips
- CLE(AR)/NOCL(EAR)/EXPO(SE)/REA(D)
- readout noise
- What CCDs are , WHICH CHIP? WHICH , Signal-to-noise, Signal-to-noise
- runs bias runs
- MULTBIAS - Takes
- runs calibration runs
- CALR(UN) - Perform
- runs change run number
- NEXTR(UN) - Change
- runs file names
- Image storage
- runs flat field runs
- FLATF(IELD) - Performs
- runs start a run
- RU(N) - The
- saturation
- What CCDs are , EXPOSURE TIME?, Time limits, Photometric standards
- saturation level
- What CCDs are
- seeing
- WHICH CHIP? WHICH , WHICH CHIP? WHICH , WHICH CHIP? WHICH , WHICH CHIP? WHICH , WHICH CHIP? WHICH , Signal-to-noise, Signal-to-noise, Signal-to-noise, Telescope and autoguider , Telescope and autoguider , Autoguiding, Filter & chip
- shutdown
- SHUTDOWN - Shut
- signal to noise
- EXPOSURE TIME?, Signal-to-noise, Filter & chip
- software, support of
- Further notes
- spatial sampling
- LimitationsExtra Observations, , WHICH CHIP? WHICH
- spectral response of detector/filter
- Filter & chip
- speed
- WHICH CHIP? WHICH , WHICH CHIP? WHICH
- stars moving on chip
- MOVESTAR - Put
- stars profiles
- STARFIT - Fit
- starting to observe
- Logging in
- tapes copying (FITSCOPY)
- FITSINIT/FITSDIR/FITSOUT/FITSIN/FITSCOPY
- FITS , Introduction, FITSCOPY
- tapes etiquette for
- Introduction
- tapes initialising (FITSINIT)
- FITSINIT/FITSDIR/FITSOUT/FITSIN/FITSCOPY
- FITS , FITSINIT
- tapes loading on tape deck
- Loading and unloading
- tapes reading
directory from (FITSDIR)
- Introduction
- tapes reading data in from (FITSIN)
- FITSINIT/FITSDIR/FITSOUT/FITSIN/FITSCOPY
- FITS , FITSINIT
- tapes reading descriptors from (DESCR)
- Introduction, DESCR
- tapes reading descriptors from (LIST)
- FITSCOPY
- tapes reading directory from (FITSDIR)
- FITSINIT/FITSDIR/FITSOUT/FITSIN/FITSCOPY
- FITS , FITSDIR
- tapes writing data to
- TAP(E)
- tapes writing data to (FITSOUT)
- FITSINIT/FITSDIR/FITSOUT/FITSIN/FITSCOPY
- FITS , FITSOUT
- tapes writing data to number of runs per tape
- FITSINIT/FITSDIR/FITSOUT/FITSIN/FITSCOPY
- FITS , FITS - data
- telemetry
- TEL(E) - System
- temperature control
- What CCDs are
- thin chips
- What CCDs are
- trial exposures
- GLA(NCE)/GFILE - A