Previous: QWIN(DOW)/WIN(DOW)/DEF_WINDOW - Enquire and alter readout window
Up: MISCELLANEOUS COMMANDS
Next: QFI(LES) - Determine current image and dump device
Previous Page: QWIN(DOW)/WIN(DOW)/DEF_WINDOW - Enquire and alter readout window
Next Page: QFI(LES) - Determine current image and dump device
BIN can be used to bin the pixels when the chip is read out from individual
pixels to groups of pixels up to a maximum size of 4 4, including
combinations such as 2
1, 3
2 pixels etc.
Parameters
There are two - the number of pixels in the (or short) axis (1,2,3
or 4) and the number of pixels in the
(or long) axis (1,2,3 or 4)
over which it is required to bin.
Both will be prompted for.
Example
Adam:> BIN 2 2
To cancel on-chip binning, use the UNBIN command, or, alternatively, the CHIP command can be used.
BIN cannot be used with parameters
and
or
with the
RCA chip, or in conjunction with the WINDOW command.