Previous: MISCELLANEOUS COMMANDS
Up: MISCELLANEOUS COMMANDS
Next: QWIN(DOW)/WIN(DOW)/DEF_WINDOW - Enquire and alter readout window
Previous Page: MISCELLANEOUS COMMANDS
Next Page: QWIN(DOW)/WIN(DOW)/DEF_WINDOW - Enquire and alter readout window

QCH(IP)/CH(IP) - Enquire and alter chip type

QCHIP prints what the current chip type is. CHIP alters the record of what chip type is being used.

Parameters

QCHIP requires none. CHIP requires ``RCA2'' or ``GEC2'' or whatever. Alternatively it will prompt if the parameter is omitted.

Examples

Adam:> CHIP GEC2

Notes

Altering the chip type automatically alters the readout window to correspond to the physical chip size.

When changing chips, the control store is automatically loaded, read back and checked.