Previous: FILTERS
Up: PRIME FOCUS SOFTWARE COMMANDS
Previous Page: QWHE(EL) - List the current wheel and the range of available wheels
Next Page: FOC(US) - Make a focus exposure

FOCUS COMMANDS

The following commands control the telescope and autoguider focus positions, the offset of the telescope on the sky and the CCD camera.

• FOC(US) - Make a focus exposure
• SETFOC(US) - Compensate telescope focus for filter change
• SETFOC(US) DISABLE - Disable automatic telscope focus change
• GETF - List the current telescope focus to the Adam terminal
• FOCINC - Change focus step size
• OFFSET - Change telescope step size
• HELP PFCU - Where to find further information