Index

This section describes the procedure to shutdown, remove and store the instrument from a development environment.  This procedure should ideally be complete 3 working days before the instrument is required to be on the telescope.
 

The other sections of this website related to this procedure are

AF2 Engineering Instrument Setup Procedure
AF2/WYFFOS Telescope Instrument Setup Procedure
AF2/WYFFOS Telescope Instrument Removal Procedure

This procedure has been divide into subsections that are easy to follow.  If you are removing AF2 for the first time and need some help then contact one of the AF2 experts.

Section 1
Section 2
Section 3
Section 4
Section 5

Carefully place the fibre module into its storage box.