AF2 Home ·
Engineering Information ·
Telescope Operator ·
Duty Engineer ·
AF2 Experts ·
Links
Autofib 2/WYFFOS Telescope Instrument Setup Procedure
Section 6 : Engineering Check
From the engineering terminal start AF2 Micro. Type the following
commands, click on the command to get more information.
Engineering Checks
-
Wake the Robot
-
Autofib OS/9 > eng
-
Engineering command > local
-
Engineering command > wake
-
If it wakes you will hear the gripper jaws actuate 3 times. Sleep
and wake the robot again.
-
Engineering command > sleep
-
Engineering command > wake
-
View a science fibre.
-
View a guide fibre.
-
Load all of the positions into the system
-
Set System to operate from ICL
-
Engineering command > remote
-
Engineering command > quit
Start ICL and check Rotator
-
Start ICL and configure for WYFFOS. (MUST EXPANDED - describe)
-
When TCS comes up Select Prime AF2 rotator
-
Check rotator limits + - Send to a cardinal point i.e. 90 degrees. Look
at robot it should be Orthogonal
Now the Daily AF2/WYFFOS duty engineer checks can be carried out.
They have been embedded within the `Autofib 2 Telescope Instrument Setup
Procedure' section of the website. See Section
7.
