This is a ICL Control Command and is to be issued at the ICL command.
AFMOVROBOT Command
| Format: | AFMOVR(OBOT) X Y
X = X position
|
| Description: | Move the robot to a new position.
This command moves the robot gripper carriage to a new (X,Y) position. Co-ordinates are given integer microns relative to the AF2 field centre. On completion, the new robot position is reported. If no parameters are given, the current robot position is reported. |
| Example: | 10:00:24> AFMOVR 20000 30200 |
For further information refer to the `AF2/WYFFOS User Manual'.
Links to other ICL Control Commands