NAOMI Start-up Check list and daily DE checks

ØFrom oasisgui switch on the simplex lamp

•Spots should be visible on the WFS window. Otherwise (and if the pickoff is at the right position, NCU light is on, shutter open) something has been left on the light path!

•As a sanity check, from TopGui try moving the FSM in X and Y, from Light Path Page: Mid range is for 4096 adc; go to 5192, 3072, you should see the spots move to the corner of a WFS cell if they were centered (1 arcsec = ½ cell). Then Midrange (not Zero!)

•Light should fall on AG7 (OASIS+Simplex mirrors); run 0.1 AG7 from Taurus, or check from the simplex:
IngridAlign.py --camera AG7

or mirroralign –camera AG7

•At this stage if the image looks good enough (fwhm <3 pixels) the checks are done

DE checks of NAOMI