This is a ICL Control Command and is to be issued at the ICL command.
AFSETUP Command
| Format: | AFSETUP NEW_FIELD
NEW_FIELD = Observation field to configure. |
| Description: | Configure AF2 to a specified field. The new field to be configured
is defined by the specified field name; the objects to which fibres are
to be assigned will have been decided using the CONFIGURE utility and saved
in a file <NEW_FIELD>. CFG.
The set-up uses the Prime Focus distortion correction defined in the file WHT_AF2DATA_DIR:WHT_PRIME.DAT, and the fibre data appropriate to the installed fibre module from the file WHT_AF2DATA_DIR:<ID>_FIBRES.DAT, where ID is the fibre module ID (LARGE|SMALL). |
| Example: | 10:22:32> setup testfield |
For further information refer to the `AF2/WYFFOS User Manual'.
Links to other ICL Control Commands