Autofib 2 AFOFFSETFIBRE Command

This is a ICL Control Command and is to be issued at the ICL command.

AFOFFSETFIBRE Command
 

Format: AFOFFSETF(IBRE) N dX dY

N = Fibre Number
dX = Offset X position
dY = Offset Y position
Description:  Offset a given fibre by an incremental amount.  

This command offsets the fibre, specified by the pivot number N, by an  amount (dX, dY) microns relative to its current position.
Example: 03:08:32> AFOFFSETF 5 2000 3400

For further information refer to the `AF2/WYFFOS User Manual'.

Links to other ICL Control Commands