Autofib 2 AFMOVEFIRBE Command

This is a ICL Control Command and is to be issued at the ICL command.

AFMOVEFIBRE Command
 

Format: AFMOVF(IBRE) N X Y

N = Fibre number
X = X coordinate
Y = Y coordinate
Description:  Move a given fibre to a new position.

This command moves a given fibre, identified by its pivot number N, from its current position to a position (X,Y). The position is given as an integer number of microns relative to the AF2 field centre. The fibre back-illumination is turned on before the placement and turned off afterwards.
Example: AFMOVF(IBRE) 21 20000 3000

For further information refer to the `AF2/WYFFOS User Manual'.

Links to other ICL Control Commands