This is a ICL Control Command and is to be issued at the ICL command.
AFENABLEFIBRE Command
| Format: | AFENAB(LEFIBRE) N
N = Fibre number |
| Description: | Enable a fibre disabled using AFDISABLEFIBRE.
The disabled fibre, N, is marked as enabled. This enables the specified fibre to be configured in future Setups. This command only works on fibres disabled using the AFDISABLEFIBRE command; fibres disabled for operational reasons can only be re-enabled from the AF2 engineering interface. If no parameter is given, the user is prompted for a fibre number. |
| Example: | 23:41:50 > AFENAB 45 |
For further information refer to the `AF2/WYFFOS User Manual'.
Links to other ICL Control Commands