Autofib 2 AF2 Command

This is a ICL Engineering Command and is to be issued at the ICL command.

AF2 Command
 

Format: AF2  P1  P2  P3  P4  P5

P1 = Action
P2 = Sub-Action
P3 = Parameter
P4 = Parameter
P5 = Parameter
Description:  This command is a shorthand for "OBEYW AF2" and it can be given a variable number of arguments.  Parameters P1. and P2 correspond to the ACTION and the SUB_ACTION respectively and are obligatory. Other parameters P3-P5 are+  optional depending on the command issued.
Example: 06:03:02 > AF2 SET HELP

For further information refer to the `AF2/WYFFOS User Manual'.

Links to other ICL Control Commands