This is an Engineering Interface Engineering Commands and is to be issued at the engineering interface.
ZMOVE Command
| Format: | ZMOVE z
z = position along z axis (microns) |
| Description: | This is a DANGEROUS command. Move the gripper Z axis to position z. Note that this command is available in extended command mode ony (see EXTENDED commands) and is potentially hazardous to the instrument. This command will only appear in the help menu if the engineering interface is in extended mode. |
| Example: | Engineering command > zmove 2000 |
For further information refer to the `AF2 Control System Software Manual'.
Links to other Engineering Interface Engineering Commands