Autofib 2 SETVIDEO Command

This is an Engineering Interface Engineering Commands and is to be issued at the engineering interface.

SETVIDEO Command
 

Format: SETVIDEO mode threshold

mode = THRESHOLD | NORMAL | INVERSE
threshold = 8 bit number
Description:  Set the current gripper tv video mode, mode may be either THRESHOLD, NORMAL or INVERSE, for threshold and inverse mode the value of
the threshold is required between 0 and 255. Currently NORMAL video mode is used by default. 
Example: Engineering command > setvideo THRESHOLD 155

For further information refer to the `AF2 Control System Software Manual'.

Links to other Engineering Interface Engineering Commands