Autofib 2 RANDOM Command

This is an Engineering Interface Engineering Commands and is to be issued at the engineering interface.

RANDOM Command
 

Format: RANDOM  fibno number

fibno = Fibre number
number = Number of times for position of fibre to be measured
Description:  This command gets the robot to measure the position of fibre fibno a total of number times moving to a random position between each measurement. Results are appended to a file random.dat in the /h0/autofib/logfiles directory.
Example: Engineering command > random 121 3

For further information refer to the `AF2 Control System Software Manual'.

Links to other Engineering Interface Engineering Commands