This is a ICL Engineering Command and is to be issued at the ICL command.
AF2_START Command
| Format: | AF2_START (no parameters) |
| Description: | Start AF2 system tasks and initialise
This command is issued by the AF2 start-up sequence to load and start the D-task and I-tasks. Checks are made to see if tasks are already present before loading is attempted. The obligatory D-task UNEX action is started to check for incoming 80x messages, and the HEALTHMONITOR action is also started. The command _must_ be called supplying the name of the UNET destination for AF2 messages. Also used by the AF2_SIMULATE command. |
| Example: | 11:22:02> af2_start |
For further information refer to the `AF2/WYFFOS User Manual'.
Links to other ICL Engineering Commands