Summary
of parameters
This page is part of the ING document
INS-DAS-24:
client-server interface for control of cameras.
Each link below leads to a detailed description of one or more parameters.
Parameters grouped by meaning
-
CAMERA: (char) the formal name of the camera.
-
INSTRUMENT: (char) the formal name of the instrument.
-
TELESCOPE: (char) the formal name of the telescope.
-
ACTUAL_TEMP: (double) current cyrostat temperature
-
CCDTEMP1: (double) current temperature at temperature monitoring point
1
-
CCDTEMP2: (double) current temperature at temperature monitoring point
2
-
CCDPRESSURE: (double) current cryostat pressure
-
CCDFLOWRATE: (double) current nitrogen flow rate
-
CCDPELTIER: (int) current Peltier cooler status (0=off, 1=on)
-
DEMAND_TEMP: (int) demanded cryostat temperature.
-
CLOCKS_ACTIVITY: (char) doings of the readout electronics.
-
SHUTTER_STATE: (char) position/activity of the shutter.
-
OBS_FILE: (char) name of last observation file to be written.
-
OBSDATA: (char) name of current raw-data directory.
-
ITH_CYCLE: (int) number of current cycle in set
-
N_CYCLES: (int) total number of cycle in current set.
-
RUN_0: (struct) state of run at rank zero.
-
run_no: (int) run number
-
readout_pc: (int) percentage read out
-
process_pc: (int) percentage processed
-
archive_pc: (int) percentage archived
-
RUN_1: (struct) state of run at rank one.
-
run_no: (int) run number
-
readout_pc: (int) percentage read out
-
process_pc: (int) percentage processed
-
archive_pc: (int) percentage archived
-
RMODE_NAME: (char) name of readout mode.
-
RMODE_NMNDRS: (int) number of MNDR cycles in each run.
-
RMODE_NREADS: (int) number of readouts per cycle.
-
STOREMODE_NAME: (char) name of FITS file storage mode.
-
RO_SECTION: (char) readout section.
-
RO_SPEED: (char) readout speed.
-
WINDOW_1: (char) readout window 1.
-
WINDOW_2: (char) readout window 2.
-
WINDOW_3: (char) readout window 3.
-
WINDOW_4: (char) readout window 4.
-
X_BINNING: (int) x binning-factor.
-
Y_BINNING: (int) y binning-factor.
-
T_DEMAND: (double) demanded integration time.
-
T_ELAPSED: (double) current integration time.
-
T_EXPOSED: (double) current exposure time.
-
T_OPEN: (char) start time of exposure.
-
T_READ: (char) time of last readout.
-
T_START: (char) start time of integration.
Parameters listed alphabetically, with types