Notes about the fibres installation at the ORM:
- There is a box in the CFG office labelled 'FIBRE
OPTICS' that contains all kinds of fibre cables with different connectors
as well as attenuators to emulate 4 and 6 kilometres.
- There is an attenuator installed in the fibre coming from the INT to the WHT, more
specifically, port 13 on gb1wht.
Due to problems with the high intensity lasers used for the gigabit switches,
3Com recommends that we have more than 2 kilometres between devices using mono-mode
cable so the attenuator is installed to emulate this distance. This is not
needed in the link coming from the Residencia neither the one coming from
the JKT.
Network Map