This is a ICL Control Command and is to be issued at the ICL command.
AFLOADMULE Command
| Format: | AFLOADM(ODULE) (no parameters) |
| Description: | Locate each fibre in the fibre module.
This command performs a check on the position of each fibre in the fibre module. The fibre position in the AF2 microcomputer are then updated. The command will check the position of disabled fibres because they may be re-enabled at some point and subsequently used. |
| Example: | 21:33:24 > AFLOADM |
For further information refer to the `AF2/WYFFOS User Manual'.
Links to other ICL Control Commands