next up previous contents
Next: CASS Up: Autoguider Commands Previous: ?REGS


Specifies the acquisition window for the Autoguider.

2=to: 2!:}Format: ACQWIND <x1> <y1> <x2> <y2>

2=to: 2!:}Example: ACQWIND 50 50 300 200

2=to: 2!:}Defaults: At Prime focus: x1=179, y1=65, x2=297, y2=185
At Cassegrain focus x1=27, y1=15, x2=379, x2=272.

2=to: 2!:}Comments: Sets the acquisition field on the Autoguider CCD in pixels. The user is not allowed to specify a window which extends outside this default window in any direction.

manuals store
Wed Sep 17 12:36:20 BST 1997