next up previous contents
Next: MULTRUN Up: Data Taking Commands - Previous: KEEP


Stops a sequence of multiple exposures.

2=to: 2!:}Format: KILLMULT <channel>

2=to: 2!:}Channel: The name of the CCD data acquisition channel.

2=to: 2!:}Example: KILLMULT AUX

2=to: 2!:}Comments: The current exposure in the series is left to complete normally, and all pending exposures are cancelled. The channel becomes ready for another command when the current exposure completes. KILLMULT can be followed by FINISH or ABORT for a complete stop.

manuals store
Wed Sep 17 12:36:20 BST 1997