Previous: OPEN
Up: CCD controller commands
Next: QUICK SPEED
Previous Page: OPEN
Next Page: QUICK SPEED

PIC

Takes an exposure and reads it out.

Format: <headnumber> 0 PIC

Comments: Local command to clear the chip, take an exposure of an exposure time previously set up with the SEX command, and read the chip out. A buffer must have been set up in the DMS to receive the data. The first parameter is the head number and is 1 or 2. The second parameter can be used to delay the start time. This command currently only works from the Network vocabulary, invoked by typing NETWORK.