Previous: Miscellaneous commands
Up: Miscellaneous commands
Next: QBI(AS)/BIA(S) - enquire and alter bias level
Previous Page: Miscellaneous commands
Next Page: QBI(AS)/BIA(S) - enquire and alter bias level
QCHIP prints what the current chip type is. CHIP alters the chip type.
ParametersQCHIP requires none. CHIP requires the chip's name or alternatively will prompt if the parameter is omitted.
Examples
Adam:> CHIP GEC4
Notes
Altering the chip type automatically alters the readout window to correspond to the physical chip size.
When changing chips, the control store is automatically loaded, read back and checked.