Previous: Command reference section
Up: Command reference section
Next: Commands listed by function
Previous Page: Command reference section
Next Page: Commands listed by function
- ABORT
- --- abort an operation; discard any associated data.
- ARC
- --- take one exposure (of an arc lamp) and save it.
- BIAS
- --- take one unpreflashed bias frame and save it.
- BIN
- --- select binned read-out of a CCD.
- COMMENT
- --- log a comment about an observation.
- CONTINUE
- --- restart an exposure suspended by PAUSE ( q.v.).
- DARK
- --- take one dark frame and save it.
- DIR(ECTORY)
- --- list observations made tonight.
- DISAB(LE_WIN)
- --- suspend the effect of windowing on a CCD.
- ENAB(LE_WIN)
- --- resume windowing after DISABLE_WIN ( q.v.).
- EXPOSE
- --- expose the detector without clearing or reading out.
- FINISH
- --- terminate an exposure immediately; save the data.
- FLASH
- --- take one preflashed bias frame and save it.
- FLAT
- --- take one flat-field exposure and save it.
- GLANCE
- --- take one exposure but do not save it to disk.
- KEEP
- --- save the last exposure to disk.
- KILLM(ULTRUN)
- --- stop a multiple exposure.
- LOG_CHANGE
- --- log a major change in observing configuration.
- LOG_NEW_DAY
- --- start a new log; add page headings.
- LOG_SORT
- --- sort the log into order of increasing run numbers.
- LOG_START
- --- restart the log display.
- MAP
- --- take one exposure (to map the dekker position) and save it.
- MULTRUN etc.
- --- make multiple exposures.
- NEWTIME
- --- change the length of an exposure.
- NONASTRO
- --- change the read-out speed to NONASTRO.
- NOTE
- --- synonym for LOG_CHANGE.
- OVERSCAN
- --- view all the IPCS' intensifier.
- PAUSE
- --- suspend an exposure.
- PREFLASH
- --- set the length of a CCD preflash.
- PROMOTE
- --- promote a scratch file to a normal run.
- QUE(UE_REPORT)
- --- report the actions in the queue.
- QUICK
- --- change the read-out speed to QUICK.
- RAT_AUTO
- --- take a channel out of interactive mode.
- RAT_INTER
- --- put a channel in interactive mode.
- RAT_SIM
- --- simulate an action or actions.
- RAT_TALK
- --- control the verbosity of the DAS.
- RAT_WAIT
- --- wait (in an ICL procedure) for an exposure to finish.
- READOUT_SPEED
- --- change the read-out speed of a CCD.
- REFORM(AT)
- --- restore the last-stored image-format.
- RESOLUTION
- --- change the resolution factors in the IPCS.
- RSPEED
- --- change the read-out speed of a CCD
(synonym of READOUT_SPEED)
- RUN
- --- take one exposure (of an astronomical target) and save it.
- SCRATCH
- --- take one exposure and save it in a scratch file.
- SETUP_CCD
- --- prepare a channel for taking CCD data.
- SETUP_IPCS
- --- prepare a channel for taking IPCS data.
- SHUTTER
- --- move a detector shutter.
- SKY
- --- take one exposure (of the night/twilight sky) and save it.
- SLOW
- --- change the read-out speed to SLOW.
- STANDARD
- --- change the read-out speed to STANDARD.
- TARGET
- --- synonym for RUN.
- TURBO
- --- change the read-out speed to TURBO.
- WINDOW
- --- define a read-out window on a CCD or a DICI window for
IPCS.
- WINK
- --- as SCRATCH ( qv.) but with no header collection.
- ZPLANE
- --- expose one plane of a cube.
Previous: Command reference section
Up: Command reference section
Next: Commands listed by function
Previous Page: Command reference section
Next Page: Commands listed by function