Boot log for V4.1.30
This is a log of the output from the system following a reset
or reload. Only one CCD controller was connected to the Cass
port.
ImageForth/68 V4.2.3 DUAL/68020 22 Dec 94
Loaded: Ram Configuration.
Image RAM : 100000C - 1FE7560 ( 15.90 Mbytes )
Data area : 1FE7560 - 1FE7560
Filtering : 8 by 8 Kernel, on Image 1000 pixels wide.
M-B : 1FE7964
B-BASE : 1FE7A68
Loaded: 16 bit Images.
Loaded: Image Stack.
Loaded: NGI
No Mouse
Loaded: Graph Plotting.
Loaded: Image Display.
Loaded: Master disk files.
Loaded: Files on Secondary disks.
Loaded: Unsigned Image Stats.
Loaded: Faster MEAN-COMB & SUM-COMB.
Loaded: Numeric Extensions
Loaded: Imaging Extensions
Loaded: Head Tables.
Loaded: CCD Memory Allocation
Loaded: DICI Driver
Loaded: DICI Readout
Loaded: Multi-Windowed Readout
Loaded: Allocating CCDs
Loaded: Head table display
Loaded: Block Transfer Program via tip
Loaded: Autoguider backup code AG-BACKUP
Loaded: Network Interface Layer
Loaded: Network Interface test
Loaded: Network Command Interpreter
Loaded: Network test words
autoguider network address AUT1
Loaded: Network names & init
Loaded: task stack investigation
LOADING VERSION_4.1.30
Loaded: AG global constants
Loaded: AG global variables
Loaded: AG utilities
PROBE Reply from Cass
Loaded: CCD controller iface
PROBE No Response from UES
PROBE No Response from Prime
Loaded: Main AG module
Loaded: MAIN AG CODE
Loaded: V4.0.2 CENTROID CODE
Loaded: ag-network interface
Loaded: Background command layer
Loaded: sealed vocabulary
Loaded: Initialising system
type ENG to get at the Engineering command set.
Please select the Autoguider application with
CASS UES PRIME AF2 GHRIL...
At this point, the system prompts for which system to configure for.
The default configuration is Cass, however it is good practice to enter
Cass at this point to ensure that the CCD controller is proporly initialised.
Cass
Selecting serial port and initialising controller ...
Initialising application parameters ...
CCD HEAD TABLE
Focus port ccdc header head# alive? ccd-temp tcnt tlen cmd reply
Cass Cass Prime 70 Cass responding -38.6 0 5000 5 TTY4 ok
A/G V4.1.30 08:38:54 >