next up previous contents
Next: STARLOG Up: Autoguider Commands Previous: SETINT

SHUT-DOWN

Shuts down the Autoguider and warms the chip up.

2=to: 2!:}Format: SHUT-DOWN

2=to: 2!:}Comments: Starts a shut down sequence for the Autoguider by warming the CCD chip up above 0 tex2html_wrap_inline5509 C. This process takes about 5 minutes and the observer should check that it works. An alternative command to warm the chip up is STEMP 20.



manuals store
Wed Sep 17 12:36:20 BST 1997