next up previous contents
Next: HELP Up: Autoguider Commands Previous: GUISIZE


Sets the position of the centre of guiding box in CCD pixels

2=to: 2!:}Format: GUIWIND <x> <y>

2=to: 2!:}Example: GUIWIND 235 120

2=to: 2!:}Defaults: X and Y default to the position of the currently selected star.

2=to: 2!:}Comments: This can be used to reacquire the guide star when the telescope is moved by an accurately known amount, or to start guiding at a predetermined position. At prime focus the the entire guiding box must be within the fibre window.

manuals store
Wed Sep 17 12:36:20 BST 1997