next up previous contents
Next: WINDOW Up: Data Taking Commands - Previous: STANDARD


Sets the CCD readout speed to TURBO SPEED.

2=to: 2!:}Format: TURBO <channel>

2=to: 2!:}Channel: The name of the CCD data acquisition channel.

2=to: 2!:}Example: TURBO AUX

2=to: 2!:}Synonym: READOUT_SPEED TURBO

2=to: 2!:}Comments: This sets the CCD to its TURBO readout mode, usually only used for setting up or for short test exposures. The penalty of the fast readout is a higher read-noise and the onset of non-linearity at lower ADU levels.

manuals store
Wed Sep 17 12:36:20 BST 1997