next up previous contents
Next: SKY Up: Data Taking Commands - Previous: SCRATCH


Sets up the default detector format, and prepares a channel for taking data.

2=to: 2!:}Format: SETUP <channel>

2=to: 2!:}Channel: The name of the CCD data acquisition channel to be used.

2=to: 2!:}Examples : SETUP PFIP

2=to: 2!:}Comments: The system will read the default detector format from the configuration database and set the detector up accordingly. The user will be informed when the set-up is complete. No exposures can be made until the channel has been set up by this command.

manuals store
Wed Sep 17 12:36:20 BST 1997