next up previous contents
Next: NEWTIME Up: Data Taking Commands - Previous: KILLMULT


Takes a sequence of exposures, all of the same exposure time

2=to: 2!:}Format: MULTRUN <channel> <nruns> <time> ["<title>"]

2=to: 2!:}Channel: The name of the CCD data acquisition channel to be used.

2=to: 2!:}Time: The exposure time in seconds

2=to: 2!:}Example: MULTRUN AUX 25 60 "AX DRACO 25 exposures"

2=to: 2!:}Comments: There also commands MULTFLAT, MULTBIAS, MULTDARK which have similar formats, except that MULTBIAS does not require a time.

manuals store
Wed Sep 17 12:36:20 BST 1997