next up previous contents
Next: GUISIZE Up: Autoguider Commands Previous: FOLLOW


Automatically finds a guide star from the HST Guide Star Catalog, and moves the guide probe to the correct location.

2=to: 2!:}Format: GSSEARCH

2=to: 2!:}Comments: GSSEARCH finds the brightest guide star; sometimes this will saturate the autoguider CCD unless very short integration times are used. GSSEARCH automatically informs the T/S of the guide probe position, so this does not need to be done by hand.

manuals store
Wed Sep 17 12:36:20 BST 1997