Previous: SETUP AND OBSERVING PROCEDURES
Up: SETUP AND OBSERVING PROCEDURES
Next: Observing Procedures
Previous Page: SETUP AND OBSERVING PROCEDURES
Next Page: Starting the computer systems

Setup Procedures

• Starting the computer systems
• Configuration of the A&G Box and Spectrograph
  • Changing Gratings
  • Changing Filters in the Main (A&G box) slides
  • Changing components in the slit area
  • Directing light to the right cameras
  • Setting Grating Angles
  • The Slit Area
  • Configuring the Spectrograph for Spectropolarimetry
• Setting up the CCD Detectors
  • Rotation
  • Tilt and coarse Focus
  • Collimator Focus
  • Hartmann test using the DMS
  • Hartmann test using the Vax
  • Minimum-FWHM using the VAX
• Setting up the IPCS
  • Camera Head Rotation
  • S--Distortion Correction
  • Collimator Focus
  • Hartmann test using the DMS
  • Hartmann test using the Vax 4000
  • Minimum-FWHM using the VAX
• Installation and Setup for Fibre observing
  • Fibre slit mounting
  • Fibre slit alignment
  • Guide fibre bundle focussing
  • Spectrograph set up
• Setting up FOS