next up previous contents
Next: Closing and restarting the Up: TCS startup Previous: Adding sources to the

Adding your own source catalogues to the TCS catalogue

To add the catalogue with blank fields (see Table 4) type
         USER> inc blank
         USER> out term

To add a home-grown catalogue, copy or ftp a file with coordinate entries (same format as the SOURCE command, one target per line) to the directory /jkt/cat/ on lpss10, and give it a suitable name e.g. 'funnyname.cat'. Then type the following in the TCS interface

         USER> inc JKT:[CAT]funnyname.cat
         USER> out term




1999-11-12