Previous: General Principles of Observing with CCDs
Up: General Principles of Observing with CCDs
Previous Page: General Principles of Observing with CCDs
Next Page: Acknowledgements
This guide aims to provide most of the available information to allow a user to operate the CCD camera on the JKT. The camera head has been operational since September 1985 and the full facilities of the new A and G unit have been available since November 1987.
Section 1 gives guidelines for using the CCD as a direct imaging instrument.
Section 2 gives details of the commands available for control and associated operations of the CCD camera.
Section 3 gives specific information on the usage of the A and G unit; the facilities and operational commands are described.
The Appendix, a separate document, gives details of the following:
The parameters of each individual chip i.e. readout noise, cosmetic defects, etc are kept in folders which are located in the control room.